Products: Gate Handles for Tape
Adviser: Gate handles for electric fence tape
Conductors play an important role where electric fences are concerned. Not only do they conduct electricity through the fence system, but they are also important where various other fence components are concerned. Thus, electric fence gate handles must match the conducting material used. For example, it is possible to buy gate handles for tape which can be combined with the widest variety of electric fence tape.
Optimum safety for animals on electric fences, thanks to quality goods
Each individual element of the electric fence contributes to the success of the entire system. This explains why the components are tailored to different purposes and requirements, and why there is such a wide choice. In addition to polywire, wire and rope / cord, you can also opt for electric fence tape. Electric fence tape is made up of several bundled conductors which are interwoven with plastic fibres. As an option, they come in the form of broad fencing tape which offers excellent conductivity and is suitable for both short fence systems and long electric fences. The tape is compatible with energisers of different power levels. Tape connectors make sure that the tape is securely attached to the fence posts. Tape insulators prevent the loss of electricity and the creation of any weak points on the fence system. Extra precautions must be taken at critical points such as the electric fence gate. You will need gate handles for electric fence tape to connect electric fence gates, gate handles and conductors. With a gate handle for the tape, you can keep the situation under control and don’t need to worry about your own safety or that of your animals.
Buy gate handles for electric fence tape online
Electric fence tape can be distinguished from the other conducting materials as it is flat and broad. For this reason it requires special insulators and connectors. Electric fence tape handles for electric fence tape are specifically designed so that the tape can be firmly and securely clipped on. An electric fence gate handle with a tape connector can be mounted in an electrically- and mechanically-safe way without difficulty, in a few easy steps. Gate handles with electric fence tape connectors are made of hard-wearing, UV-resistant plastic combined with galvanised metal or rust-free steel. On the inside, they feature a spring tensioner which has a high loading capacity and long service life. The electric fence tape is clipped into the clasp without the use of tools, while an eyelet or hook on the other side is used to mount the tape onto the gate. Depending on the model, a gate handle for electric fencing tape is suitable for a diameter of up to 20 or 40 mm (fencing tape).